Aerospace Engineering (manufacturing engineering) PhD Projects, Programmes & Scholarships

Loughborough University Wolfson School of Mechanical, Electrical and Manufacturing Engineering

An integrated approach for damage identification in composite materials

Non-destructive inspection based on acoustics is today one of the primary methods for the identification of damage precursors in components and structures. Read more

Supervisor: Dr K Baxevanakis

1 July 2024 PhD Research Project Self-Funded PhD Students Only

Loughborough University Wolfson School of Mechanical, Electrical and Manufacturing Engineering

Modelling slip bands and short crack growth in Ni-based superalloys using discrete crystal plasticity

In metal fatigue, microplastic strain localisation leads to the formation of discrete slip bands, which contribute to the initiation and propagation of short cracks. Read more

Supervisor: Dr K Baxevanakis

1 July 2024 PhD Research Project Self-Funded PhD Students Only

Mechatronics system for hybrid manufacturing processing - (ENG 1316X2)

Rolls-Royce University Technology Centre (UTC) in Manufacturing and On-Wing Technology, The University of Nottingham. Applicants are invited to undertake a 3 year PhD program in partnership with industry to address key challenges in on-platform manufacturing engineering. Read more

Year round applications PhD Research Project Competition Funded PhD Project (Students Worldwide)

Rolls Royce sponsored PhD scholarship - Machining of new aerospace materials - (ENG - 1591)

Applications are invited to undertake a 3 year PhD programme in partnership with industry to address key challenges in manufacturing engineering. Read more

Year round applications PhD Research Project Competition Funded PhD Project (Students Worldwide)

Rolls-Royce sponsored PhD Scholarship, Design and Simulation of Stiffness-Adjustable Robotic Systems for Performing on-Wing Repair of Aero-Engines - (ENG 1318X2)

Applicants are invited to undertake a 3 year PhD programme in partnership with industry to address key challenges in on-platform manufacturing engineering. Read more

Year round applications PhD Research Project Competition Funded PhD Project (Students Worldwide)

Computer vision and robot control for performing on-wing repair of aero-engines - (ENG - 1398X1)

Rolls-Royce University Technology Centre (UTC) in manufacturing and On-Wing Technology, The University of Nottingham. Applicants are invited to undertake a 3 year PhD programme in partnership with industry to address key challenges in on-platform manufacturing engineering. Read more

Year round applications PhD Research Project Competition Funded PhD Project (Students Worldwide)

Canterbury Christ Church University SCHOOL OF ENGINEERING, TECHNOLOGY AND DESIGN

Advancements in Biomedical Device Design and Manufacturing for Personalized Healthcare

This research project offers an exciting opportunity for individuals interested in the intersection of biomedical engineering and advanced manufacturing techniques, particularly in the realm of personalized healthcare. Read more

Supervisor: Dr H Hassanin

Year round applications PhD Research Project Self-Funded PhD Students Only

Brunel University London Mechanical and Automotive Engineering

3D printing of scaffolds for tissue engineering and regenerative medicine

This project aims to develop multifunctional novel bioactive tissue scaffolds using 3D printing, biomaterials science and controlled drug delivery systems to enhance tissue regeneration. Read more

Supervisor: Dr B Zhang

Year round applications PhD Research Project Self-Funded PhD Students Only

University of Birmingham School of Chemical Engineering

Characterisation of the physics of photopolymer curing and formulation effects of highly filled slurries during additive ceramic core manufacture

Do you want to work at the cutting edge of Aerospace manufacturing technology? Are you interested in Additive Manufacturing? Do you want to work as part… Read more

Supervisor: Dr A C Cendrowicz

Year round applications PhD Research Project Funded PhD Project (UK Students Only)

Canterbury Christ Church University SCHOOL OF ENGINEERING, TECHNOLOGY AND DESIGN

Additive Manufacturing of High-Performance Composite Materials

This research project offers an exciting opportunity for individuals interested in advancing the field of materials processing science, specifically in the realm of additive manufacturing (AM) of high-performance composite materials. Read more

Supervisor: Dr H Hassanin

Year round applications PhD Research Project Self-Funded PhD Students Only

University of Sheffield Department of Automatic Control and Systems Engineering

Last chance to apply

Developing digital twin and digital product passports for high-value electric machines to support their end-of-life decisions

In support of the research activities of the EPRSC-funded Future Electrical Machines Manufacturing Hub, the University of Sheffield is offering a funded PhD scholarship to undertake research in the development of digital twin and digital product passports for high-value electric machines to support their end-of-life decisions. Read more

Supervisor: Prof A Tiwari

30 April 2024 PhD Research Project Competition Funded PhD Project (Students Worldwide)

University of Strathclyde Department of Mathematics & Statistics

High-dimensional computations with applications to uncertainty quantification for multiphysics engineering systems

The Strathclyde Centre for Doctoral Training (SCDT) in "Data-driven uncertainty-aware multiphysics simulations" (StrathDRUMS) is a new, multi-disciplinary centre of the University of Strathclyde, which will carry out cutting-edge research in data-driven modelling and uncertainty quantification for multiphysics engineering systems. Read more

Supervisors: Dr YK Kazashi, Dr S Bi, Dr M D A De Angelis

Year round applications PhD Research Project Funded PhD Project (UK Students Only)

University of Strathclyde Department of Civil & Environmental Engineering

Investigating the role of verified methods for enhancing trust in digital twins

The Strathclyde Centre for Doctoral Training (SCDT) in "Data-driven uncertainty-aware multiphysics simulations" (StrathDRUMS) is a new, multi-disciplinary centre of the University of Strathclyde, which will carry out cutting-edge research in data-driven modelling and uncertainty quantification for multiphysics engineering systems. Read more

Supervisors: Dr M D A De Angelis, Dr S Bi, Dr YK Kazashi, Dr MR Ruggeri

Year round applications PhD Research Project Funded PhD Project (UK Students Only)

University of Birmingham School of Chemical Engineering

Effect of additive ceramic core material formulation on rheology and particle segregation during build and its contribution to shrinkage anisotropy and interlayer strength

Do you want to work at the cutting edge of Aerospace manufacturing technology? Are you interested in Additive Manufacturing? Do you want to work as part… Read more

Supervisor: Dr A C Cendrowicz

Year round applications PhD Research Project Funded PhD Project (UK Students Only)

University of Oxford Department of Engineering Science

Research Studentship in Impact Engineering

Research Studentship in Impact Engineering. 3.5-year D.Phil. studentship . Project. New paradigms for X-ray probing of dynamic failure at the mesoscale. Read more

Supervisor: Prof D Eakins

1 May 2024 PhD Research Project Funded PhD Project (Students Worldwide)

Ghent University Faculty of Engineering and Architecture

PhD (4 years, paid) on on Advanced Material Modelling using Finite Element Analysis for Technical Textiles and Textile Manufacturing

Job description. We are seeking a dedicated PhD candidate and postdoc on advanced material modelling in the textile domain. In this project you will dive deep into a cutting-edge research area, exploring the complexities of advanced textile material modelling. Read more

Supervisor: Prof L Daelemans

Year round applications PhD Research Project Funded PhD Project (Students Worldwide)

University of Bath Department of Mechanical Engineering

ZENITH PhD Project: Sustainable production processes for composite aerospace components

The Department of Mechanical Engineering at the University of Bath is inviting applications for this funded PhD project expected to start in September 2024. Read more

Supervisors: Dr E Loukaides, Dr R C Lupton, Prof R Butler

30 May 2024 PhD Research Project Funded PhD Project (Students Worldwide)

RMIT University School of Engineering

Synchrotron X-ray inline monitoring of Laser Additive Manufacturing processes using a Machine Learning approach

Laser additive manufacturing (LAM; laser 3D printing) is a key underpinning technology for the digital revolution (Industry 4.0), producing complex objects directly from 3D CAD drawings. Read more

Supervisors: Dr Y Chen, Dr A Rack

Year round applications PhD Research Project Competition Funded PhD Project (Students Worldwide)

University of Liverpool School of Engineering

Improved structural integrity assessments for wrinkling defects in composite turbines

The EPSRC Centre for Doctoral Training in Net Zero Maritime Energy solutions (N0MES) has a 4-year funded PhD place available for an exceptional researcher. Read more

Supervisor: Dr W Christian

20 May 2024 PhD Research Project Funded PhD Project (Students Worldwide)

University of Bath Department of Mechanical Engineering

ZENITH PhD project: Elastic tailoring of composite winglet-wing systems for enhanced performance

The Department of Mechanical Engineering at the University of Bath is inviting applications for this funded PhD project expected to start in September 2024. Read more

Supervisors: Dr T Harrell, Prof R Butler

30 May 2024 PhD Research Project Funded PhD Project (Students Worldwide)

Cranfield University School of Aerospace, Transport and Manufacturing (SATM)

Novel Methods for the Characterisation of Helicopter Aero-acoustics PhD

Cranfield University has been at the forefront of rotorcraft research for the last 13 years, having an established track record on rotorcraft modelling, performance, aero-mechanics, and aero-acoustics. Read more

Supervisor: Dr Ioannis Goulos

26 June 2024 PhD Research Project Funded PhD Project (UK Students Only)

University of Bath Department of Mechanical Engineering

ZENITH PhD Project: Integrated hydrogen sensing for composite structures

The Department of Mechanical Engineering at the University of Bath is inviting applications for this funded PhD project expected to start in September 2024. Read more

Supervisors: Dr ATR Rhead, Prof T J Mays, Prof F Marken

30 May 2024 PhD Research Project Funded PhD Project (Students Worldwide)

University of Edinburgh School of Engineering

Novel preforms for Automated Fibre Placement

Automated Fiber Placement (AFP) is an emerging technique to manufacture advanced composites for the aerospace industry. One of its main advantages is the possibility to define complex fiber paths to optimize the stiffness for a given loading scenario. Read more

Supervisor: Dr F Martinez-Hergueta

14 September 2024 PhD Research Project Competition Funded PhD Project (Students Worldwide)

University of Edinburgh School of Engineering

4D printed composite morphing structures

4D printed actuators transform energy into mechanical motion in response to specific stimuli. They are employed to conduct a range of unique tasks such as self-assembling, and conceive compact systems with a low manufacturing and maintenance costs. Read more

Supervisor: Dr F Martinez-Hergueta

14 September 2024 PhD Research Project Competition Funded PhD Project (Students Worldwide)

Atlantic Technological University Research

Last chance to apply

Electronically Controlled Adaptive AM Heat Exchanger (eHEX)

Electronically Controlled Adaptive AM Heat Exchanger (eHEX). The Postgraduate Research Programme Innovation in Digital Manufacturing and Design (IDMD) offers 12 PhD research scholarships in 12 separate projects to commence in 2024. Read more

Supervisors: Dr GMcG McGranaghan, Dr JL Lohan, Dr DT Tormey, Mr MK Kadivar

29 April 2024 PhD Research Project Funded PhD Project (Students Worldwide)

King’s College London School of Natural & Mathematical Sciences

Coupled heat transfer – stress – hydrogen diffusion modelling in cryogenic combustion systems for zero emission jet engines

Transport, the UK’s biggest source of greenhouse gas emissions, presents a major obstacle to UK’s decarbonisation plans. To overcome it, we must develop new sustainable fuel technologies. Read more

Supervisors: Dr CS Skamniotis, Dr DM Moxey, Dr C Gattinoni

1 May 2024 PhD Research Project Competition Funded PhD Project (Students Worldwide)

University of Bath Department of Mechanical Engineering

ZENITH PhD Project: Micromechanical testing of cryogenic composites

The Department of Mechanical Engineering at the University of Bath is inviting applications for this funded PhD project expected to start in September 2024. Read more

Supervisors: Dr A J G Lunt, Dr C Fallon

30 May 2024 PhD Research Project Funded PhD Project (Students Worldwide)

University of Bath Department of Mechanical Engineering

ZENITH PhD Project: Micromechanical simulation and modelling of carbon fibre composites for hydrogen storage

The Department of Mechanical Engineering at the University of Bath is inviting applications for this funded PhD project expected to start in September 2024. Read more

Supervisors: Dr Y Chen, Dr ATR Rhead, Prof R Butler

30 May 2024 PhD Research Project Funded PhD Project (Students Worldwide)

University of Bath Department of Chemical Engineering

ZENITH PhD Project: Hydrodynamic and thermal performance of liquid hydrogen in cryogenic tanks

The Department of Mechanical Engineering at the University of Bath is inviting applications for this funded PhD project expected to start in September 2024. Read more

Supervisors: Prof J Chew, Dr C Moreno, Dr ATR Rhead

30 May 2024 PhD Research Project Funded PhD Project (Students Worldwide)