European Molecular Biology Laboratory (Heidelberg) Featured PhD Programmes
Birkbeck, University of London Featured PhD Programmes
Engineering and Physical Sciences Research Council Featured PhD Programmes
Sheffield Hallam University Featured PhD Programmes
Kingston University Featured PhD Programmes
United Kingdom
Bath×
10 miles

Aeronautical, Maritime and Transport Engineering PhD Projects, Programs & Scholarships in Bath

We have 13 Aeronautical, Maritime and Transport Engineering PhD Projects, Programs & Scholarships in Bath

  • Aeronautical, Maritime and Transport Engineering×
  • United Kingdom×
  • Bath×
  • clear all
Order by 
Showing 1 to 13 of 13
  Reaching the diffraction-limit of acoustic imaging with autonomous underwater vehicles
  Dr A Hunter
Application Deadline: 1 April 2020

Funding Type

PhD Type

Project team. Dr Alan Hunter (University of Bath), Dr Thomas Fickenscher (Helmut-Schmidt University) & Dr Holger Schmaljohann (Bundeswehr, Maritime Technology & Research).
  Innovative systems analysis for a zero-carbon industry
  Dr R C Lupton
Application Deadline: 25 March 2020

Funding Type

PhD Type

Lead Supervisor & informal enquiries. Dr Rick Lupton ([email protected]). PROJECT. Applications are invited for a 3.5-year PhD studentship, in the development and application of modelling and visualisation to support an urgent transition to a zero-carbon industry and society.
  Optimisation trade-off between wing scale stiffness tailoring for improved aeroelastic load reduction and panel scale fibre steering for buckling
  Dr A Rhead, Dr D Cleaver, Prof R Butler
Application Deadline: 25 February 2020

Funding Type

PhD Type

Supervisory team. Dr Andrew Rhead, Dr David Cleaver, Prof Richard Butler. Project enquiries. Dr Andrew Rhead [email protected] PROJECT.
  Additively manufactured morphing components for aeroelastic applications
  Dr E Loukaides
Application Deadline: 25 February 2020

Funding Type

PhD Type

Informal queries should be directed to Dr Evripides Loukaides ([email protected]). Fuel consumption and structural performance of aeroplanes strongly depends on the geometry and behaviour of the wings.
  Numerical and Experimental Methods for Certification of Bonded Primary Structure
  Prof R Butler
Application Deadline: 2 March 2020

Funding Type

PhD Type

Supervisory team. Prof Richard Butler, Dr Karim Anaya-Izquierdo, Prof Chiara Bisagni (TU Delft). Project enquiries. Prof Richard Butler ([email protected]).
  Hydrogen storage for aerospace propulsion
  Dr P Iravani, Prof C R Bowen
Application Deadline: 25 February 2020

Funding Type

PhD Type

Supervisory team. Dr Pejman Iravani, Prof Chris Bowen & Prof Tim Mays. Project enquiries. [email protected] PROJECT. The project will investigate, manufacture and test novel approaches to store hydrogen for usage as a propulsion fuel in aircraft and unmanned aerial vehicles (UAVs).
  Design and validation methods for additively manufactured heat exchangers
  Dr JMF Flynn
Applications accepted all year round

Funding Type

PhD Type

With electrification being one of the biggest potential disruptors in modern transport, there is a growing need for lightweight, reliable and efficient thermal management systems.
  Active Whirl Flutter Control
  Dr D Cleaver
Application Deadline: 25 March 2020

Funding Type

PhD Type

Lead Supervisor & informal enquiries. Dr David Cleaver ([email protected]). PROJECT. There is currently great interest from rotorcraft manufacturers in tilt-rotor aircraft (see AW609 and Cleansky Next Gen TiltRotor) due to their ability to achieve VTOL and high-speed long-range flight.
  Modelling of Transient Heat Transfer in Aero-engine Compressor Rotors
  Dr H Tang, Dr J Scobie, Prof G Lock
Application Deadline: 25 March 2020

Funding Type

PhD Type

Informal enquiries. Dr Hui Tang ([email protected]). PROJECT. The next generation of aero-engines will require an increase in the total pressure ratio in order to improve efficiency and meet environmental targets.
  AI approaches to automate Bill of Materials Validation.
  Prof C Brace
Applications accepted all year round

Funding Type

PhD Type

A Bill of Materials (BoM) is a document that lists all of the components and resources needed to build a product, in this case a vehicle.
  Life cycle assessment of current and future passenger transport technologies in the UK
  Dr S Parsons
Applications accepted all year round

Funding Type

PhD Type

In the coming years, the electric powertrain is expected to replace fossil fuelled vehicles. From an environmental perspective, there are still many uncertainties when assessing the potential life cycle impacts of future powertrain technologies.
  Novel Shaft Seals for Turbomachinery
  Dr J Scobie
Application Deadline: 2 March 2020

Funding Type

PhD Type

The Turbomachinery Research Centre (TRC) at the University of Bath is seeking a PhD candidate for an experimental project to develop novel shaft seals for gas turbines.
  Centre for Doctoral Training in Advanced Automotive Propulsion Systems (AAPS)

Funding Type

PhD Type

The Centre for Doctoral Training in Advanced Automotive Propulsion Systems (AAPS) at the University of Bath is offering at least seven fully funded four-year studentships to join the second cohort of students in September 2020.
Show 10 15 30 per page
  • 1


FindAPhD. Copyright 2005-2020
All rights reserved.