University of Leeds Featured PhD Programmes
University of Kent Featured PhD Programmes
Birkbeck, University of London Featured PhD Programmes
Xi’an Jiaotong-Liverpool University Featured PhD Programmes
University of Hull Featured PhD Programmes
"3d"×
10 miles

Electrical & Electronic (3d) PhD Projects, Programs & Scholarships

We have 49 Electrical & Electronic (3d) PhD Projects, Programs & Scholarships

  • "3d" ×
  • Electrical & Electronic×
  • clear all
Order by 
Showing 1 to 30 of 49
  3D object classification
  Dr T G Kalganova
Applications accepted all year round

Funding Type

PhD Type

With the current development of 3D modeling, and 3D printing, the next type of information representation of objects is 3D form. The majority of existing methods of object classification are based on applying images to deep learning approaches.
  Advanced Optical Fibre Fabrication and Applications
  Prof J Canning
Applications accepted all year round

Funding Type

PhD Type

Advanced Optical Fibre Fabrication. Areas can include new Bi fibres (led by Prof. Peng at UNSW; Prof Canning is a Conjoint Professor) for amplifiers, lasers and sensors and novel structured fibres including photonic crystal fibres, Fresnel fibres, spun structured optical fibres and so on.
  Miniaturised 3D biomedical imaging: super-resolution microscopy development using 3D-printing and structured illumination
  Dr R Bauer, Dr P Murray, Prof D Uttamchandani
Application Deadline: 15 March 2020

Funding Type

PhD Type

Start date. October 2020. Duration. 3.5 years, fully funded (European/UK students only).
  Computational imaging: Multi-Sensors Fusion for High Resolution 3D Lidar videos (EPS2020/40)
  Dr AH Halimi, Prof S McLaughlin
Application Deadline: 28 February 2020

Funding Type

PhD Type

Recent technological innovations, eg detection and acquisition hardware, have pushed sparse-photon imaging to the fore in a variety of applications including 3D Lidar imaging and microscopy.
  Object Detection and Tracking Using High-Speed 3D Image Sensors
  Dr I Gyongy
Application Deadline: 29 June 2020

Funding Type

PhD Type

3D image capture by existing LIDAR and Time-of-Flight (ToF) sensors is typically limited to relatively low frame rates due to bottleneck issues in the data readout and/or the necessity for optical scanning to cover a sufficiently large field of view.
  Sustainable Manufacturing of 2D and 3D RFID Tags (DHUF2019)
  Dr D Hutt, Dr D Whalley, Prof A West
Application Deadline: 1 August 2020

Funding Type

PhD Type

Radio Frequency Identification (RFID) is widely used in ID cards and as a method to identify and track products within factories, warehouses and shops.
  3D Electrospinning - shaping the structure of tissue engineering scaffolds
  Research Group: Advanced Materials Engineering
  Dr P Twigg
Applications accepted all year round

Funding Type

PhD Type

Electrospinning applies a high voltage to a polymer solution to create fine fibres that form non-woven mats. These can be used as scaffolds for tissue engineering, acting as the extracellular matrix and supporting the cells.
  Dielectric measurements with a 3D printer
  Research Group: Communication Technologies
  Dr M P Robinson
Applications accepted all year round

Funding Type

PhD Type

The dielectric properties of an object – its permittivity and conductivity – give us useful information about it in fields ranging from non-destructive testing to body composition studies.
  Application of digital holography for underwater measurements
  Dr T Thevar, Dr S S Aphale
Applications accepted all year round

Funding Type

PhD Type

Underwater digital holography is a powerful technique to study marine organisms and marine pollution (e.g. micro-plastics), marine evolution, etc.
  A novel human 3D in vitro dynamic model with integrated sensors for studying neurovasculature inflammation
  Dr V Pensabene, Dr S Saha
Application Deadline: 30 April 2020

Funding Type

PhD Type

The brain microvasculature is composed of endothelial cells, pericytes and astrocytes. The endothelium forms the barrier between the blood and the brain cells (i.e “blood-brain barrier “, BBB).
  Shape Memory Materials for Additive Manufacturing
  Dr E Pei
Applications accepted all year round

Funding Type

PhD Type

About this PhD Project. Additive Manufacturing or 3D Printing is an emerging technology that has gained popularity within the disciplines of design, engineering and manufacturing.
  Advanced manufacturing processes to enable the heterogeneous integration of power electronics - Ref: CL1UF2018
  Prof C Liu
Application Deadline: 3 May 2020

Funding Type

PhD Type

Heterogeneous integration of power devices refers to the assembly of separately manufactured power semiconductors, passive components and control elements into a single package, i.e.
  Acoustic Patterning for Printed Electronics
  Prof M C Fraser
Application Deadline: 8 March 2020

Funding Type

PhD Type

The University of Bath is inviting applications for the following PhD project based in the Department of Computer Science under the supervision of Prof Mike Fraser.
  Multi-model-based Data Fusion for exoskeleton system with Brain-Computer Interface
  Research Group: Applied Computing
  Dr Q Zhang
Applications accepted all year round

Funding Type

PhD Type

Wearable health device such as exoskeleton becomes a popular research topic with huge marketing potentials. The wearable health device can be widely for monitoring the health condition or as a tool for rehabilitation engineering.
  Super-resolved Terahertz Microscopy for Cellular Imaging
  Dr J Bowen
Applications accepted all year round

Funding Type

PhD Type

"The goal of this research project is to develop a new terahertz microscopy technique for the imaging of live cells with a spatial resolution of better than 1 micrometre.
  Monitoring chemical dynamics in soil and water with advanced microfluidic sensors
  Research Group: Mechatronics Engineering
  Dr X. Niu
Application Deadline: 31 August 2020

Funding Type

PhD Type

Supervisor. Dr. Xize Niu. Co-supervisor Dr. Adrian Nightingale and Prof. Tiina Roose. Project description. Excess nitrogen and phosphorous leaching from agricultural and horticultural lands into waterways is a long-standing challenge for agricultural sustainability and environmental protection.
  Spintronics with Topological Semimetals
  Research Group: Intelligent Systems and Nanoscience
  Prof Y Xu
Applications accepted all year round

Funding Type

PhD Type

According to Moore’s law, the number of transistors in integrated circuits doubles approximately every two years. If this trend continues, the atomic length scales will be reached within several years.
  Design and Fabrication of an In-line Hemolysis Sensor For the Quality Control of Clinical Blood Samples (EPS2020/09)
  Dr M Kersaudy-Kerhoas
Application Deadline: 28 February 2020

Funding Type

PhD Type

In this project, the candidate will develop an in-line hemolysis sensor for non-contact measurement into microfluidic cartridges.
  Doctor of Engineering (EngD): Active 2-dimensional optical meta-surfaces (STMicroelectronics (R&D) Ltd)
  Research Group: CDT in Applied Photonics
  Prof D Reid, Dr X Chen
Application Deadline: 28 February 2020

Funding Type

PhD Type

Project Description. The market for high contrast diffractive gratings is growing rapidly as active sensing of 3D scenes becomes a dominant feature in modern consumer electronics.
  Machine Learning Solutions for Intelligent Reflecting Surface-Aided Secure Communications (EPS2020/45)
  Dr MA Khandaker
Application Deadline: 28 February 2020

Funding Type

PhD Type

This project will investigate machine learning enabled security solutions in a programmable radio environment using intelligent reflecting surfaces for next generation wireless communication systems.
  Wearable Sensors and Soft Robots for Biomedical Applications
  Dr M Amjadi
Application Deadline: 31 March 2020

Funding Type

PhD Type

The Integrated Soft Machines Lab in the Institute of Mechanical, Process and Energy Engineering (IMPEE) at Heriot-Watt University is offering a 3-year fully funded PhD studentship to explore wearable sensors and soft robots for biomedical applications.
  Novel Micro-optical structures on optical fiber tip with two-photon lithography
  Prof C Liberale
Applications accepted all year round

Funding Type

PhD Type

Optical fibers are nowadays an ubiquitous core element of telecommunication systems, new laser technologies and biomedical devices.
  Development of Novel Functional Intermediate Layers for Power Electronics Integration - Ref: CL2UF2018
  Prof C Liu
Application Deadline: 3 May 2020

Funding Type

PhD Type

Power electronics are widely used in electric and hybrid vehicles (EHV), aerospace crafts, renewable power components and traction control systems.
  NSIRC251 PhD Studentship - Towards a Fundamental Understanding of Stress Relaxation Cracking
  Ms H Stedman
Applications accepted all year round

Funding Type

PhD Type

Institution. National Structural Integrity Research Center (NSIRC). PhD Supervisor. Imran Bhamji and Kasra Sotoudeh. Application Deadline.
  PhD Studentship in Mechanical Engineering - Novel Subsurface Inspection Radar to Inspect Tunnels and Tunnels Linings for improved maintenance
  Prof M Robinson
Application Deadline: 13 March 2020

Funding Type

PhD Type

Number of awards. 1. Start date and duration. April 2020 for 3 years. Overview. The PhD study is to prepare for commercialisation and demonstration of a novel, portable radar system that provides a simple non-invasive mechanism for inspecting tunnel infrastructure.
  Exposing the nanoscale ultrafast dynamics of Dirac systems via near-field terahertz spectroscopy
  Dr J Boland
Applications accepted all year round

Funding Type

PhD Type

To create energy-efficient, faster ’21st century devices’ that can impact a range of sectors, including healthcare, wireless communication, defence, security and clean energy, integrated photonic, electronic and quantum technologies are essential.
  EPSRC CDT in Advanced Biomedical Materials
Application Deadline: 20 March 2020

Funding Type

PhD Type

Applications are invited from qualified graduates for fully-funded four-year PhD studentships in the area of Advanced Biomedical Materials.
  Creating and Rendering Digital Humans for Immersive Worlds and Video Games
  Prof D Cosker
Application Deadline: 29 March 2020

Funding Type

PhD Type

The University of Bath is inviting applications for the following PhD project under the supervision of Prof Darren Cosker (http://cs.bath.ac.uk/~dpc/) in the Department of Computer Science.
  High Quality Facial Animation for Digital Humans: Crossing the Uncanny Valley
  Prof D Cosker
Application Deadline: 29 March 2020

Funding Type

PhD Type

The University of Bath is inviting applications for the following PhD project under the supervision of Prof Darren Cosker (http://cs.bath.ac.uk/~dpc/) in the Department of Computer Science.
  Up to 12 fully funded PhD places available within the EPSRC CDT in Topological Design.

Funding Type

PhD Type

We have up to ten fully funded PhD places available on this brand new EPSRC CDT in Topological Design.
Show 10 15 30 per page


FindAPhD. Copyright 2005-2020
All rights reserved.