University of Leeds Featured PhD Programmes
University of Portsmouth Featured PhD Programmes
University of Kent Featured PhD Programmes
Birkbeck, University of London Featured PhD Programmes
De Montfort University Featured PhD Programmes
"3d"×
10 miles

Manufacturing (3d) PhD Projects, Programs & Scholarships

We have 53 Manufacturing (3d) PhD Projects, Programs & Scholarships

  • "3d" ×
  • Manufacturing×
  • clear all
Order by 
Showing 1 to 30 of 53
  Prediction of microscale geometry and performance of 3D-printed medical implants (AGUF2019)
  Dr A Gleadall
Application Deadline: 31 August 2020

Funding Type

PhD Type

Cutting-edge medical implants for bone fracture repair are manufactured from biodegradable polymers because, unlike permanent devices, they are fully absorbed by the body over several months and do not need surgical removal after healing.
  3D Print and Additive Manufacturing of Wax and Plastic Injection Moulds.
  Dr E Sabet
Applications accepted all year round

Funding Type

PhD Type

This project offers a chance to work on a truly disruptive and innovative research project in the high-tech and high-value manufacturing, with very high potential impact in aerospace and energy sectors.
  Advanced Optical Fibre Fabrication and Applications
  Prof J Canning
Applications accepted all year round

Funding Type

PhD Type

Advanced Optical Fibre Fabrication. Areas can include new Bi fibres (led by Prof. Peng at UNSW; Prof Canning is a Conjoint Professor) for amplifiers, lasers and sensors and novel structured fibres including photonic crystal fibres, Fresnel fibres, spun structured optical fibres and so on.
  3D Printed Synthetic Bone Graft Substitutes
  Dr K Essa, Dr A abdelghaffar
Application Deadline: 10 March 2020

Funding Type

PhD Type

The advanced manufacturing lab at the School of Engineering, University of Birmingham is looking for talent student to join the group and work on new project for 3D printing of synthetic bone.
  Additive Manufacturing (3D Printing) of multi-materials using novel drop on demand “Metal Jetting”
  Prof R Hague
Applications accepted all year round

Funding Type

PhD Type

Project description. The successful applicant will work on an exciting research programme that has the potential to move metal 3D printing beyond its current limits.
  Simulation Modelling of Distortion and Shrinkage in Stereolithography 3D Printing.
  Dr E Sabet
Applications accepted all year round

Funding Type

PhD Type

This project offers a chance to work on a truly disruptive and innovative research project in the high-tech and high-value manufacturing, with very high potential impact in aerospace and energy sectors.
  Optimising Mechanical Performance of Additively Manufactured (3D Printed) Titanium Alloys
  Dr M Kartal, Dr Amir Siddiq
Applications accepted all year round

Funding Type

PhD Type

Additive Manufacturing (AM), also known as 3D printing, is a common term used to describe the technology in which three-dimensional (3D) objects are fabricated by successive layers of material.
  3D printing of components with tunable thermal properties
  Prof K Koziol
Application Deadline: 31 May 2020

Funding Type

PhD Type

Applications are invited for MSc research project, working on metal powder 3D printing of components with tunable thermal properties.
  Additive Manufacturing (3D Printing) of multi-functional scaffold and tissue models through multi-material projection micro stereolithography (pµSLA)
  Dr Y He
Applications accepted all year round

Funding Type

PhD Type

Project description. The successful applicant will participate in a fully funded programme to look into the production of high accuracy multi-functionalized scaffold and tissue models mimicking actual body parts.
  3D shape reconstruction of deformable objects for biomechanics applications
  Dr A Drory
Applications accepted all year round

Funding Type

PhD Type

Applications are invited for an exciting fully-funded PhD studentship in the Bioengineering Research Group, Faculty of Engineering at the University of Nottingham.
  Sensor driven process control for robotic 3D printing of concrete
  Dr P Kinnell, Dr R Buswell
Applications accepted all year round

Funding Type

PhD Type

Concrete 3D printing is an emerging manufacturing process that uses industrial robots to build large-scale components for a range of construction applications.
  Development of Novel 3D-Printable Chemical Reaction and Separations Technologies for Continuous Flow Synthesis of Drugs
  Dr S Ferguson, Dr P Donnellan
Application Deadline: 27 February 2020

Funding Type

PhD Type

In recent years flow chemistry and continuous manufacturing have been the object of increasing interest in the pharmaceutical industry.
  3D Printing of Electronic Ceramic Materials (Ph.D. Graduate Research Assistant Position)
  Prof E Sabolsky
Application Deadline: 8 April 2020

Funding Type

PhD Type

The Department of Mechanical and Aerospace Engineering (MAE) at the West Virginia University (WVU) anticipates filling one Ph.D. graduate research position to investigate the fabrication and testing of novel electronic ceramics using a 3D printing technology.
  3D laser beam shaping
  Dr R Carter, Dr J D Shephard
Applications accepted all year round

Funding Type

PhD Type

Combining 2D beam shaping elements (including refractive and diffractive elements) with bespoke focussing optics to shape a laser beam though the entire focal volume rather than in a single focal plane.
  Full-funded PhD Studentship in Design of 3D printed alloys for medical implants
  Prof P Rivera, Dr W Wen
Application Deadline: 29 February 2020

Funding Type

PhD Type

A full PhD studentship on alloy design for 3D printed medical devices is offered. The project is led by Dr Wei Wen (Advisor) and Professor Pedro Rivera (Principal Supervisor) at the Department of Engineering, Lancaster University, in collaboration with Carpenter Technology.
  Manufacturing accurate net-shaped Concrete components using hybrid-3D Printing
  Mr B Young
Application Deadline: 29 March 2020

Funding Type

PhD Type

Application details. Reference number. ABCE/3DCP/2. Start date of studentship. 1 July 2020. Closing date of advert. 29 March 2020.
  Sustainable Manufacturing of 2D and 3D RFID Tags (DHUF2019)
  Dr D Hutt, Dr D Whalley, Prof A West
Application Deadline: 1 August 2020

Funding Type

PhD Type

Radio Frequency Identification (RFID) is widely used in ID cards and as a method to identify and track products within factories, warehouses and shops.
  Bioresorbable scaffolds for the repair and regeneration of natural bone
  Dr K Manda, Dr F Buchanan, Dr A Lennon
Applications accepted all year round

Funding Type

PhD Type

QUB – Mechanical and Aerospace Engineering PhD project 2019-2020.
  Developing a Computer Aided Design Interface for Multi-Material Additive Manufacturing (3D Printing)
  Dr E Pei
Applications accepted all year round

Funding Type

PhD Type

The next generation of Additive Manufacturing technologies will utilise the combination of different materials at extremely small scales to produce multi-functional structures.
  Additive manufacturing (3D printing) of metals
  Prof A J Moore
Application Deadline: 8 March 2020

Funding Type

PhD Type

Applications are invited for a fully-funded PhD studentship starting in September 2020. It is suitable for well-qualified students who have (or expect to obtain) a first class degree in engineering, physics or other relevant subject.
  Improving design against fatigue
  Dr H Basoalto
Applications accepted all year round

Funding Type

PhD Type

Fatigue life prediction in the aerospace components relies on fracture mechanics for relatively long cracks (>1mm). Nevertheless, most of the fatigue life is spent while the crack is relatively short (.
  Shape Memory Materials for Additive Manufacturing
  Dr E Pei
Applications accepted all year round

Funding Type

PhD Type

About this PhD Project. Additive Manufacturing or 3D Printing is an emerging technology that has gained popularity within the disciplines of design, engineering and manufacturing.
  A Novel Method to Recycle Composite Machining Swarf (Advert Reference: SF19/EE/MCE/SHYHA)
  Dr I Shyha, Prof K Lafdi
Applications accepted all year round

Funding Type

PhD Type

The use of composite materials, in particular polymeric based, is considerably rising in many industries including aerospace, automotive, sports and medical equipment.
  Acoustic Patterning for Printed Electronics
  Prof M C Fraser
Application Deadline: 8 March 2020

Funding Type

PhD Type

The University of Bath is inviting applications for the following PhD project based in the Department of Computer Science under the supervision of Prof Mike Fraser.
  PhD vacancy (4 years) on nondestructive testing (NDT) of composites using Guided Waves
  Prof W VAN PAEPEGEM
Applications accepted all year round

Funding Type

PhD Type

The aim of this project is to develop robust guided waves NDT methods that can detect defects in Fiber reinforced plastic parts (focus on aerospace and automotive industry).
  Additive Manufacture of Bacterial Biofilm Resistant Surfaces using Novel High Performing Polymer “Inks”
  Prof D Irvine
Applications accepted all year round

Funding Type

PhD Type

Title. Additive Manufacture of Bacterial Biofilm Resistant Surfaces using Novel High Performing Polymer “Inks”. Topic. The production of Novel Devices Incorporating Bacterial Biofilm Resistant Surfaces via Additive Manufacturing Techniques.
  Additive Manufacturing of Opto-Electronic Devices using Novel High Performing Polymer Inks
  Prof D Irvine
Applications accepted all year round

Funding Type

PhD Type

Topic. The production of Novel Opto-Electronic devices by Additive Manufacturing based on the deposition of material containing low dimensional materials that exhibit differing and tuneable dielectric properties.
  Vascularisation of tissue engineered skeletal muscle
  Prof M.P. Lewis, Dr A Capel
Applications accepted all year round

Funding Type

PhD Type

Tissue engineering strategies have created a large number of functional tissues constructed from cells and matrix components over the past two decades.
  Development of Novel Functional Intermediate Layers for Power Electronics Integration - Ref: CL2UF2018
  Prof C Liu
Application Deadline: 3 May 2020

Funding Type

PhD Type

Power electronics are widely used in electric and hybrid vehicles (EHV), aerospace crafts, renewable power components and traction control systems.
  NSIRC236 Development of online inspection and monitoring of WAAM
  Dr C Nageswaran, Ms H Stedman, Mr J Lambert
Applications accepted all year round

Funding Type

PhD Type

Background. Additive manufacturing (AM) is a suite of processes that “join materials to make parts from 3D model data, usually layer upon layer”.
Show 10 15 30 per page


FindAPhD. Copyright 2005-2020
All rights reserved.