Coventry University Featured PhD Programmes
FindA University Ltd Featured PhD Programmes
University of Sheffield Featured PhD Programmes
Engineering and Physical Sciences Research Council Featured PhD Programmes
University of Sheffield Featured PhD Programmes
"strathclyde"×
10 miles

Manufacturing (strathclyde) PhD Projects, Programs & Scholarships

We have 19 Manufacturing (strathclyde) PhD Projects, Programs & Scholarships

  • "strathclyde" ×
  • Manufacturing×
  • clear all
Order by 
Showing 1 to 19 of 19
  Prestigious Strathclyde/NPL PhD Studentship: Expanding measurement limits of hybrid photonic voltage and current sensors
  Dr P Niewczas, Prof G Burt
Applications accepted all year round

Funding Type

PhD Type

The electricity transmission and distribution networks are undergoing a significant level of transformation because of the massive deployment of renewable energy sources, disrupting the conventional ways the networks are protected, controlled and maintained.
  AHRC DTP Scotland - PhD Studentship Scheme 2019/20

Funding Type

PhD Type

The University of Strathclyde is part of a consortium of ten Higher Education institutions which has been awarded funding from the Arts and Humanities Research Council (AHRC) to support PhD studentships at full RCUK rates.
  An investigation into Soft Tissue Biomechanics Using Computational Fluid Dynamics
  Dr M Lappa
Applications accepted all year round

Funding Type

PhD Type

Aim of the present project is the modelling and numerical simulation of soft-tissue growth in rotating bioreactors and related morphological evolution.
  Particle Dynamics in Thermally Driven Flows
  Dr M Lappa
Applications accepted all year round

Funding Type

PhD Type

We propose an investigation into a variety of dynamics and effects produced by the interaction of particles with fluid flow driven by a temperature gradient.
  Protein Crystals and Pharmaceutical Processes: A Fluid-dynamic Approach to Macromolecular Crystal Engineering
  Dr M Lappa
Applications accepted all year round

Funding Type

PhD Type

The relevance of self-organization, pattern formation and non-equilibrium behaviour in a wide range of problems, related to macromolecular crystal engineering and typical pharmaceutical processes for the production of drugs and medicines, calls for a concerted approach using the tools of statistical physics.
  Automated Manufacturing of Smart Concrete Components
  Dr M Perry
Application Deadline: 15 September 2019

Funding Type

PhD Type

4 year industry-focused PhD project with enhanced £19k / year stipend, funded by COWI, Highways England, and the Scottish Research Partnership in Engineering Industry Doctorate Programme in Advanced Manufacturing.
  The Development of Automated Decision Making for Non Destructive Testing of Additive Manufactured Parts with BAE Systems Air
  Dr D Evans
Application Deadline: 30 December 2019

Funding Type

PhD Type

Additive manufacturing (AM) has been receiving significant interest from industry as it offers the attraction of lighter structures, greater part flexibility and increased complexity without the need for multiple manufacturing processes.
  Multiscale Computational Framework for Advanced Manufacturing and Materials
  Dr Amir Siddiq, Dr M Kartal, Prof R McMeeking
Application Deadline: 30 October 2019

Funding Type

PhD Type

Conventional manufacturing processes involve high cost and lead times because of design and manufacturing of product specific tooling for new materials and parts.
  Towards heterogeneous integration of photonic and electronic devices in microsystems
  Prof J Heffernan, Dr K Groom
Applications accepted all year round

Funding Type

PhD Type

A funded PhD Studentship (UK/EU only) is available for research into III-V compound semiconductor structures tailored specifically for integration within a micro-transfer print process for heterogeneous integration of photonic and electronic devices in microsystems.
  CDT-P&O-01: Intelligent body interface systems for prosthetic and orthotic rehabilitation
  Research Group: Bioengineering
  Prof L. Jiang
Application Deadline: 31 August 2019

Funding Type

PhD Type

One fully funded, four-year PhD studentship is available in the EPSRC Centre for Doctoral Training in Prosthetics and Orthotics commencing in October 2019.
  The Migration of Droplets in Multi-Material Problems and Dispersed Multiphase Flows
  Dr M Lappa
Applications accepted all year round

Funding Type

PhD Type

The relevance of droplet dynamics and related non-equilibrium phenomena in several industrial applications and manufacturing techniques calls for new advanced studies using the tools of thermodynamics and computational fluid dynamics.
  Automation of metallographic microstructural analysis to support deployment of automated image analysis
  Dr D Evans
Application Deadline: 30 December 2019

Funding Type

PhD Type

Are you looking to gain direct industrial experience whilst developing your specialist research area of interest?. The manufacturing processes alter the microstructure of materials, which determines their mechanical properties.
  Development hot edge detection system for live evaluation of shape of large forged components
  Dr D Evans
Application Deadline: 30 December 2019

Funding Type

PhD Type

Are you looking to gain direct industrial experience whilst developing your specialist research area of interest?. The AFRC Tier 1 industrial partners supporting this project are Boeing, Rolls Royce, Timet, Aubert & Duval, Bifrangi, Baker Hughes GE and Spirit Aerospace.
  Electrical Steels: Magnetic properties enhancement using alternative manufacturing processes
  Dr D Evans
Application Deadline: 30 December 2019

Funding Type

PhD Type

Working with the AFRC’s Tier 1 Members this PhD proposal is a collaboration between Cogent-Power and AFRC on the development and advancement of electric steel (E-steel) technologies for electrical vehicles.
  Exploring innovation capability in the UK Advanced Manufacturing value chain
  Dr J MacBryde
Application Deadline: 30 September 2019

Funding Type

PhD Type

The ambition of the UK Industrial Strategy is to boost productivity, capitalise on UK’s strengths and act on the weaknesses that may stop the country from realising its full potential.
  Flow Forming of Materials for Aerostructures
  Dr D Evans
Application Deadline: 30 December 2019

Funding Type

PhD Type

Are you looking to gain direct industrial experience with Boeing, whilst developing your specialist research area of interest?.
  In-Space Manufacturing
  Dr D Evans
Application Deadline: 30 December 2019

Funding Type

PhD Type

In-space manufacturing has the potential to replace ground based manufacturing for space systems to reduce the launch cost and ground inventory of spare parts.
  Smart asset assessment for life-extension engineering using artificially intelligent feature recognition
  Dr X Yan
Application Deadline: 30 September 2019

Funding Type

PhD Type

This application is for a 3.5 year PhD to research into the area of reverse engineering. This PhD will look specifically at the reverse engineering of end of life assets, such as subsea components for oil and gas etc.
  Automated Robotic In-Process Inspection of Metal 3D Printed & Welded Components
  Dr C Macleod, Prof S.G. Pierce
Application Deadline: 30 August 2019

Funding Type

PhD Type

Traditionally 3D printing and welding of manufactured components and quality control inspection of such joints are distinctly separate processes in the supply chain, which ultimately limits productivity, throughput and increases re-work.
Show 10 15 30 per page
  • 1


FindAPhD. Copyright 2005-2019
All rights reserved.