Anglia Ruskin University Featured PhD Programmes
University of Exeter Featured PhD Programmes
Newcastle University Featured PhD Programmes
University of Portsmouth Featured PhD Programmes
University of Hull Featured PhD Programmes
"php"×
10 miles

Materials Science (php) PhD Projects, Programs & Scholarships

We have 29 Materials Science (php) PhD Projects, Programs & Scholarships

  • "php" ×
  • Materials Science×
  • clear all
Order by 
Showing 1 to 15 of 29
  CO2 catalytic conversion into fuels and fuel-precursors using biomass-derived H-donors - LEVERHULME
  Dr I Graca, Dr C Fernandez-Martin
Application Deadline: 28 February 2020

Funding Type

PhD Type

This experimental project will deal with the global challenge of mitigating CO2 emissions to the atmosphere, by using CO2 as a raw-material to produce fuels and fuel-precursors.
  Conversion of waste plastics to fuel and energy - LEVERHULME
  Dr W Afzal, Dr I Graca
Application Deadline: 28 February 2020

Funding Type

PhD Type

The remarkable properties of plastics make them the most commonly used modern materials since early twentieth century. Every year several hundreds of millions of tons of plastics are produced globally.
  EPSRC and SFI CDT in Sustainable Chemistry Atoms-2-Products: An Integrated Approach Fully funded 48-month PhD studentships

Funding Type

PhD Type

The EPSRC and SFI CDT in Sustainable Chemistry. Atoms-2-Products would like to invite suitably qualified and highly motivated applicants interested in working in the two of our research thematic areas “Machine Learning Supported Catalysis” and “Sustainable Gelators and Rheology Modifiers”.
  A novel silk biomaterial-based combinational approach to enhance axonal regrowth after spinal cord injury
  Dr W Huang, Prof C McCaig, Dr P Seib
Application Deadline: 13 March 2020

Funding Type

PhD Type

Spinal cord injury causes permanent and incurable functional impairment below the injure site. No single therapy has ever been successful, so a combined approach is much more likely to succeed.
  Soft Robotics Wearable Technologies in Healthcare - LEVERHULME
  Dr M Giannaccini, Dr S S Aphale
Application Deadline: 28 February 2020

Funding Type

PhD Type

Applications are invited for one fully funded doctoral position in soft robotics at the School of Engineering, University of Aberdeen.
  Sustainable conversion of biomass-based wastes into porous bio-carbons and their application in CO2 capture - LEVERHULME
  Dr C Fernandez-Martin, Dr D Dionisi, Dr I Graca
Application Deadline: 28 February 2020

Funding Type

PhD Type

The current most difficult challenge of biomass-based wastes is the lack of a volume-balancing set of applications and valorisation techniques which can decrease the large volumes that are sent to the landfill.
  Multifunctional polymer nanocomposites for energy or healthcare applications
  Prof B Chen
Applications accepted all year round

Funding Type

PhD Type

Multifunctional elastomer nanocomposites are promising in a variety of applications including stretchable electronic devices, soft robotics, actuators, sensors, wearable medical devices and soft tissue scaffolds.
  Precision Medicine DTP - High-Precision Tools for Intraoperative Brain Cancer Surgery
  Research Group: Centre for Inflammation Research
  Dr M Vendrell Escobar, Dr P Brennan, Dr C Portal
Application Deadline: 8 April 2020

Funding Type

PhD Type

Background. Glioblastomas are one of the most common and aggressive brain cancers. Current treatments provide a mean survival of 14 months, with most tumours recurring post-resection.
  PhD Position – Chemistry and Materials Science – Novel Photoresists for Multimaterial 3D and 4D Printing
  Prof B.E. Rapp, Dr D Helmer
Application Deadline: 12 February 2020

Funding Type

PhD Type

We offer a PhD Position at the NeptunLab. The NeptunLab is the highly interdisciplinary research group of Prof. Bastian E. Rapp (owner of the chair of Process Technology) at the Department of Microsystems Technology (IMTEK) at the University of Freiburg.
  PhD Position – Chemistry and Materials Science – Sustainable Materials for 3D and 4D Printing
  Dr D Helmer
Application Deadline: 12 February 2020

Funding Type

PhD Type

We offer a PhD Position at the NeptunLab. The NeptunLab is the highly interdisciplinary research group of Prof. Bastian E. Rapp (owner of the chair of Process Technology) at the Department of Microsystems Technology (IMTEK) at the University of Freiburg.
  PhD Position – Chemistry and Materials Science –Light-responsive polymeric materials for 3D and 4D printing
  Prof B.E. Rapp, Dr D Helmer
Application Deadline: 12 February 2020

Funding Type

PhD Type

We offer a PhD Position at the NeptunLab. The NeptunLab is the highly interdisciplinary research group of Prof. Bastian E. Rapp (owner of the chair of Process Technology) at the Department of Microsystems Technology (IMTEK) at the University of Freiburg.
  PhD Position –Chemistry and Chemical Engineering – New chemical approaches to volumetric 3D Printing
  Prof B.E. Rapp, Dr D Helmer
Application Deadline: 26 February 2020

Funding Type

PhD Type

We offer a PhD Position at the NeptunLab. The NeptunLab is the highly interdisciplinary research group of Prof. Bastian E. Rapp at the Department of Microsystems Technology (IMTEK) at the University of Freiburg.
  PhD Position –Electrical or Microsystems Engineering – Microcontroller Programming and Sensor design for Biosensors and parallelization of Microfluidics
  Prof B.E. Rapp, Dr D Helmer
Application Deadline: 26 February 2020

Funding Type

PhD Type

We offer a PhD Position at the NeptunLab. The NeptunLab is the highly interdisciplinary research group of Prof. Bastian E. Rapp at the Department of Microsystems Technology (IMTEK) at the University of Freiburg.
  Iron Snow in Planetary Cores
  Dr C Davies, Dr A Walker
Applications accepted all year round

Funding Type

PhD Type

Planetary magnetic fields exhibit remarkable variability in both strength and structure. These fields are generated in metallic cores and thus provide a unique probe into the dynamics and evolution of planetary interiors.
  Advanced design of fibre reinforced composites - using multiscale reliability analysis and optimisation
  Dr P Dunning, Dr S Sriramula
Applications accepted all year round

Funding Type

PhD Type

This project aims to advance the design of components made from fibre reinforced composite materials, by combining techniques in multiscale analysis, structural reliability and design optimisation.
Show 10 15 30 per page


FindAPhD. Copyright 2005-2020
All rights reserved.