European Molecular Biology Laboratory (Heidelberg) Featured PhD Programmes
University of Exeter Featured PhD Programmes
Heriot-Watt University Featured PhD Programmes
Sheffield Hallam University Featured PhD Programmes
De Montfort University Featured PhD Programmes
"3d"×
10 miles

Materials Science (3d) PhD Projects, Programs & Scholarships

We have 83 Materials Science (3d) PhD Projects, Programs & Scholarships

  • "3d" ×
  • Materials Science×
  • clear all
Order by 
Showing 1 to 30 of 83
  Atom probe tomography for next generation 3D semiconductor nanodevice characterization
  Dr W Vandervorst, Dr J Scheerder
Application Deadline: 15 April 2020

Funding Type

PhD Type

The ever-ongoing downscaling of semiconductor technology has led to a paradigm shift from planar to 3D devices. Industry has already started moving towards 3D architectures such as FinFETS, nanosheets and nanowires because they offer better electrostatic control and reduced power dissipation [1].
  Prediction of microscale geometry and performance of 3D-printed medical implants (AGUF2019)
  Dr A Gleadall
Application Deadline: 31 August 2020

Funding Type

PhD Type

Cutting-edge medical implants for bone fracture repair are manufactured from biodegradable polymers because, unlike permanent devices, they are fully absorbed by the body over several months and do not need surgical removal after healing.
  3D Print and Additive Manufacturing of Wax and Plastic Injection Moulds.
  Dr E Sabet
Applications accepted all year round

Funding Type

PhD Type

This project offers a chance to work on a truly disruptive and innovative research project in the high-tech and high-value manufacturing, with very high potential impact in aerospace and energy sectors.
  Advanced Optical Fibre Fabrication and Applications
  Prof J Canning
Applications accepted all year round

Funding Type

PhD Type

Advanced Optical Fibre Fabrication. Areas can include new Bi fibres (led by Prof. Peng at UNSW; Prof Canning is a Conjoint Professor) for amplifiers, lasers and sensors and novel structured fibres including photonic crystal fibres, Fresnel fibres, spun structured optical fibres and so on.
  Design and Manufacture of Broadband 3D Multilayer Metamaterials for Microwave and mm-wave Application
  Prof A P Hibbins, Prof J R Sambles
Application Deadline: 31 March 2020

Funding Type

PhD Type

Joint supervisors. Prof Alastair P Hibbins, Prof J Roy Sambles. External partner. John Davies (Thales). ***. Project objective. To develop broadband metamaterial designs for antenna and radome applications using additive manufacturing techniques.
  3D Printed Synthetic Bone Graft Substitutes
  Dr K Essa, Dr A abdelghaffar
Application Deadline: 10 March 2020

Funding Type

PhD Type

The advanced manufacturing lab at the School of Engineering, University of Birmingham is looking for talent student to join the group and work on new project for 3D printing of synthetic bone.
  PhD Position –Chemistry and Chemical Engineering – New chemical approaches to volumetric 3D Printing
  Prof B.E. Rapp, Dr D Helmer
Application Deadline: 26 February 2020

Funding Type

PhD Type

We offer a PhD Position at the NeptunLab. The NeptunLab is the highly interdisciplinary research group of Prof. Bastian E. Rapp at the Department of Microsystems Technology (IMTEK) at the University of Freiburg.
  Simulation Modelling of Distortion and Shrinkage in Stereolithography 3D Printing.
  Dr E Sabet
Applications accepted all year round

Funding Type

PhD Type

This project offers a chance to work on a truly disruptive and innovative research project in the high-tech and high-value manufacturing, with very high potential impact in aerospace and energy sectors.
  Overcoming the barriers to brain delivery; bioengineering 3D printed microfluidic chips to continuous manufacture targeted nanoparticles and elucidate their nose to brain permeability
  Dr A Lalatsa, Prof A Butt, Dr A Bucchi
Application Deadline: 23 February 2020

Funding Type

PhD Type

Applications are invited for a fully-funded three-year PhD to commence in October 2020. This PhD studentship is1 of 6 PhD studentships funded by the University of Portsmouth in the area of biomaterials and bioengineering.
  Optimising Mechanical Performance of Additively Manufactured (3D Printed) Titanium Alloys
  Dr M Kartal, Dr Amir Siddiq
Applications accepted all year round

Funding Type

PhD Type

Additive Manufacturing (AM), also known as 3D printing, is a common term used to describe the technology in which three-dimensional (3D) objects are fabricated by successive layers of material.
  Numerical Modelling of 3D Microstructure of Nonwovens
  Dr E Demirci, Dr A Gleadall
Applications accepted all year round

Funding Type

PhD Type

The main aim of the proposed project is to develop a novel scheme for the analysis of a 3D orientation distribution function (ODF) of fibers in nonwovens using non-destructive testing methods, such as, X-ray micro computed tomography (CT), and to benchmark nonwovens analytically & graphically based on their 3D fibrous structure.
  Building novel in vitro models to generate musculoskeletal interfaces using 3D bioprinting
  Dr J Paxton
Applications accepted all year round

Funding Type

PhD Type

Musculoskeletal interfaces are the areas of the body where tissue types meet, for example the bone-tendon, bone-cartilage and muscle-tendon junctions.
  Development of photo emission spectroscopy from planar to 3D structure
  Dr W Vandervorst, Dr T Conard
Application Deadline: 15 April 2020

Funding Type

PhD Type

Surface and interface analysis, within the semiconductor industry, has reached a level of refinement beyond that imaginable 25 years ago.
  3D Printing of Electronic Ceramic Materials (Ph.D. Graduate Research Assistant Position)
  Prof E Sabolsky
Application Deadline: 8 April 2020

Funding Type

PhD Type

The Department of Mechanical and Aerospace Engineering (MAE) at the West Virginia University (WVU) anticipates filling one Ph.D. graduate research position to investigate the fabrication and testing of novel electronic ceramics using a 3D printing technology.
  Mechanical Properties of Interfaces in 3D Printed Single- and Multi-Material Parts
  Dr M Grasso, Dr H Hadavinia
Applications accepted all year round

Funding Type

PhD Type

Additive Manufacturing techniques can be seen as an important change in the manufacturing methodology as the final form is achieved through a bottom-up approach, via the addition of material in a layer-by-layer fashion.
  Full-funded PhD Studentship in Design of 3D printed alloys for medical implants
  Prof P Rivera, Dr W Wen
Application Deadline: 29 February 2020

Funding Type

PhD Type

A full PhD studentship on alloy design for 3D printed medical devices is offered. The project is led by Dr Wei Wen (Advisor) and Professor Pedro Rivera (Principal Supervisor) at the Department of Engineering, Lancaster University, in collaboration with Carpenter Technology.
  Sustainable Manufacturing of 2D and 3D RFID Tags (DHUF2019)
  Dr D Hutt, Dr D Whalley, Prof A West
Application Deadline: 1 August 2020

Funding Type

PhD Type

Radio Frequency Identification (RFID) is widely used in ID cards and as a method to identify and track products within factories, warehouses and shops.
  3D printed polymer nanocomposites
  Dr O Istrate, Prof B Chen
Application Deadline: 12 March 2020

Funding Type

PhD Type

Additive manufacturing (3D printing) is one of several new technological breakthroughs that are expected to lead the factories of the future, where conventional equipment will be replaced by smart, flexible and customized systems.
  3D Electrospinning - shaping the structure of tissue engineering scaffolds
  Research Group: Advanced Materials Engineering
  Dr P Twigg
Applications accepted all year round

Funding Type

PhD Type

Electrospinning applies a high voltage to a polymer solution to create fine fibres that form non-woven mats. These can be used as scaffolds for tissue engineering, acting as the extracellular matrix and supporting the cells.
  3D Spectrum Imaging and Visualisation of Chemical Microstructure
  Dr J Leng
Application Deadline: 28 February 2020

Funding Type

PhD Type

This PhD studentship will make a key contribution to the development of a methodology to produce 3D chemical maps of a multiphase material (or the interface between two different materials) from the visible to the atomic scale by utilising the state of the art electron microscopy facilities in the Leeds Electron Microscopy and Spectroscopy centre (LEMAS).
  Bioresorbable scaffolds for the repair and regeneration of natural bone
  Dr K Manda, Dr F Buchanan, Dr A Lennon
Applications accepted all year round

Funding Type

PhD Type

QUB – Mechanical and Aerospace Engineering PhD project 2019-2020.
  Developing a Computer Aided Design Interface for Multi-Material Additive Manufacturing (3D Printing)
  Dr E Pei
Applications accepted all year round

Funding Type

PhD Type

The next generation of Additive Manufacturing technologies will utilise the combination of different materials at extremely small scales to produce multi-functional structures.
  Strategic synthesis of magnetically interesting high nuclearity complexes of 3d-4f metal ions
  Research Group: Chemistry and Biosciences
  Dr S Nayak, Dr C Seaton
Applications accepted all year round

Funding Type

PhD Type

Molecule-based magnets are highly interesting with their potential applications in high-density data storage devices and quantum computing.
  Improving design against fatigue
  Dr H Basoalto
Applications accepted all year round

Funding Type

PhD Type

Fatigue life prediction in the aerospace components relies on fracture mechanics for relatively long cracks (>1mm). Nevertheless, most of the fatigue life is spent while the crack is relatively short (.
  Shape Memory Materials for Additive Manufacturing
  Dr E Pei
Applications accepted all year round

Funding Type

PhD Type

About this PhD Project. Additive Manufacturing or 3D Printing is an emerging technology that has gained popularity within the disciplines of design, engineering and manufacturing.
  Developing streamlined approaches to assessing the systemic and hepatic effects of nanomaterials (EPS2020/08)
  Prof V Stone
Application Deadline: 28 February 2020

Funding Type

PhD Type

Integrated approaches to testing and assessment (IATAs) are under development to assess the hazards of nanomaterials via ingestion, inhalation and dermal application.
  Structure-property relationship in solid tumours – An integrated experimental and computational approach towards more effective early cancer diagnosis
  Dr Y Chen, Prof RL Reuben
Applications accepted all year round

Funding Type

PhD Type

Biological tissue often has unique three-dimensional hierarchical microstructures and morphologies, constantly evolving through their development and patho-physiological stages.
  Computational Materials Design
  Prof W Wenzel
Applications accepted all year round

Funding Type

PhD Type

We are seeking a Ph.D. student for the development of multiscale simulation methods to work in the recently funded excellence cluster at KIT.
  Advanced manufacturing processes to enable the heterogeneous integration of power electronics - Ref: CL1UF2018
  Prof C Liu
Application Deadline: 3 May 2020

Funding Type

PhD Type

Heterogeneous integration of power devices refers to the assembly of separately manufactured power semiconductors, passive components and control elements into a single package, i.e.
  Design and development of paper/responsive polymer hybrid micro-device (Advert Reference: SF19/EE/MCE/XU)
  Dr B Xu, Dr Y Li
Applications accepted all year round

Funding Type

PhD Type

Paper micro-device is a technology that is particularly well-suited for use in public health, diagnostics for resource-limited settings, veterinary medicine, testing of food and water quality, and environmental monitoring.
Show 10 15 30 per page


FindAPhD. Copyright 2005-2020
All rights reserved.