University of Sheffield Featured PhD Programmes
University of West London Featured PhD Programmes
University of Kent Featured PhD Programmes
University of Southampton Featured PhD Programmes
University College London Featured PhD Programmes
10 miles

Aberdeen University Materials Science PhD Projects, Programs & Scholarships

We have 24 Aberdeen University Materials Science PhD Projects, Programs & Scholarships

  • Materials Science×
  • Aberdeen University×
  • clear all
Order by 
Showing 1 to 15 of 24
  Electrocatalysis for Energy Conversion and Storage
  Prof A Cuesta Ciscar
Applications accepted all year round

Funding Type

PhD Type

Electrochemistry allows to convert chemical energy directly into electrical energy, and vice versa, with high efficiency and, therefore, electrochemical systems are excellent candidates to store energy from renewables and convert it back into work when needed.
  New calcium phosphate bone cements for potential biomaterial applications; bone repair and/or scaffold fabrication
  Prof I Gibson, Prof J M S Skakle
Applications accepted all year round

Funding Type

PhD Type

Calcium phosphates bone cements are widely used for bone-replacement materials due to their chemical similarity to natural bone but also their ability to set and harden in situ and their ability to be injected as a paste.
  The synthesis and photolysis of photoacid generators used in polymer resists for making silicon chips
  Dr M J Plater, Dr W T A Harrison
Applications accepted all year round

Funding Type

PhD Type

Polymer resists are used as thin films in the manufacture of silicon chips. They are spin coated onto a silicon wafer and irradiated through a pattern in a mask.
  Applications of topology to soft matter physics
  Dr M Grant, Dr R Hepworth
Applications accepted all year round

Funding Type

PhD Type

This project will address mathematical problems in the research field of algebraic topology, inspired by the theory of topological defects in soft materials.
  Advanced design of fibre reinforced composites - using multiscale reliability analysis and optimisation
  Dr P Dunning, Dr S Sriramula
Applications accepted all year round

Funding Type

PhD Type

This project aims to advance the design of components made from fibre reinforced composite materials, by combining techniques in multiscale analysis, structural reliability and design optimisation.
  Application of Nanotechnology in Drilling Engineering
  Dr R Rafati, Dr A Sharifi
Applications accepted all year round

Funding Type

PhD Type

Production from unconventional hydrocarbon resources, such as shale gas, shale oil, deepwater and arctic reservoirs requires advanced drilling and extraction technologies.
  Biogas upgrading by means of cyclic adsorption processes
  Dr C Fernandez-Martin, Dr D Dionisi
Applications accepted all year round

Funding Type

PhD Type

Global warming is one of the most worldwide current challenges facing humanity, a direct consequence of the increasing CO2 emissions generated from the combustion of fossil fuels.
  CO2 catalytic conversion into fuels and fuel-precursors using biomass-derived H-donors - LEVERHULME
  Dr I Graca, Dr C Fernandez-Martin
Application Deadline: 28 February 2020

Funding Type

PhD Type

This experimental project will deal with the global challenge of mitigating CO2 emissions to the atmosphere, by using CO2 as a raw-material to produce fuels and fuel-precursors.
  Computational Framework for Metal Forming of High Strength Alloys
  Dr Amir Siddiq, Dr M Kartal
Applications accepted all year round

Funding Type

PhD Type

Conventional metal forming processes involve high cost and lead times because of design and manufacturing of product specific tooling for new materials and parts.
  Conversion of waste plastics to fuel and energy - LEVERHULME
  Dr W Afzal, Dr I Graca
Application Deadline: 28 February 2020

Funding Type

PhD Type

The remarkable properties of plastics make them the most commonly used modern materials since early twentieth century. Every year several hundreds of millions of tons of plastics are produced globally.
  Development of cutting-edge microporous adsorbents for gas separation processes
  Dr C Fernandez-Martin, Dr A Majumder
Applications accepted all year round

Funding Type

PhD Type

Developing cost-effective adsorbents aiming at separating impurities from different gas mixtures is a real and necessary challenge for the industry, especially the energy sector.
  Durability analysis in hydrogen fuel cell vehicles
  Dr M Aleyaasin, Dr A ALIAKBAR JAMSHIDI FAR
Applications accepted all year round

Funding Type

PhD Type

In this project , the heavy duty hybrid electric vehicles is considered for the investigation. The propulsion in these trucks is based on parallel operation of a bank of lithium batteries and series of hydrogen fuel cells.
  Enhancing the performance, condition, safety and reliability of offshore wind energy infrastructure systems using optimal design, inspections, structural health monitoring and structural control
  Dr P Omenzetter, Dr P Dunning, Dr S S Aphale
Applications accepted all year round

Funding Type

PhD Type

Wind turbines are exposed to frequent structural damage increasing the cost of wind energy generation. To drive these costs down, this project will develop new automated methods for detection of structural damage to wind turbines by examining vibration responses measured by sensors attached to the structure.
  Hydrodynamics of Magnetic Responsive Foams
  Dr R Rafati, Dr A Sharifi
Applications accepted all year round

Funding Type

PhD Type

Multiphase flow systems such as foams contribute considerably to the world economy and have a wide range of applications from food, medical and fire-fighting to environmental treatment, mineral processing and oil and gas industries.
  Laser induced breakdown spectroscopy for subsea applications
  Dr T Thevar, Dr K Nakkeeran
Applications accepted all year round

Funding Type

PhD Type

Laser Induced Breakdown Spectroscopy (LIBS) is a widely used technique to obtain the elemental constituents of a sample. The process uses a short pulse of focused laser light to evaporate a minute volume of a target substance by highly localized heating to temperatures greater than 5000 K.
Show 10 15 30 per page


FindAPhD. Copyright 2005-2020
All rights reserved.