Don't miss our weekly PhD newsletter | Sign up now Don't miss our weekly PhD newsletter | Sign up now

We have 34 Mechanical Engineering (natural) PhD Projects, Programmes & Scholarships

Discipline

Discipline

Engineering

Location

Location

All locations

Institution

Institution

All Institutions

PhD Type

PhD Type

All PhD Types

Funding

Funding

All Funding


Mechanical Engineering (natural) PhD Projects, Programmes & Scholarships

We have 34 Mechanical Engineering (natural) PhD Projects, Programmes & Scholarships

Long Term Behaviour of Natural Fibre Reinforced Concrete (NFRC)

These projects are open to students worldwide, but have no funding attached. Therefore, the successful applicant will be expected to fund tuition fees at the relevant level (home or international) and any applicable additional research costs. Read more

Analysis of post-combustion CO2 capture from natural gas power plants using CFD and process co-simulation

The use of natural gas as a fuel for electricity production is expected to gradually increase in the next decades. Since it is acknowledged that large CO2 emission cuts should be achieved in the near future, it seems plausible that these systems may have to be coupled to CO2 capture schemes. Read more

Natural Laminar Flow Wing Design and Optimisation

This study will investigate the design and optimisation of NLF wings for transonic flow. The stability of the boundary layer around the wing including cross flow instability and attachment line instability will be studied. Read more

Gaseous Pipeline Transport and its underground porous media Storage for NET ZERO Innovation

These projects are open to students worldwide, but have no funding attached. Therefore, the successful applicant will be expected to fund tuition fees at the relevant level (home or international) and any applicable additional research costs. Read more

Experimental Investigation of Singular Two-phase Pressure Losses Relevant to Nuclear System Thermal-hydraulic Applications

A fully funded 4-year EPSRC ICASE PhD Studentship, co-sponsored by Westinghouse, is available in the Nuclear Futures Institute at Bangor University to design and perform experiments at the THOR loop to measure two-phase pressure drop across selected simple geometrical singularities within a relevant range of conditions. Read more

Fur and Feathers: colour, structure and flow control

The objective in this exciting cross-disciplinary project is to investigate the potential of a bio-inspired coating of flexible devices to passively modify energetic modes of an unsteady crossflow and to assess, for the first time, the role of colour in determining mechanical properties. Read more

3D printing of scaffolds for tissue engineering and regenerative medicine

This project aims to develop multifunctional novel bioactive tissue scaffolds using 3D printing, biomaterials science and controlled drug delivery systems to enhance tissue regeneration. Read more

Understanding the role of alloying additions in the development of high-performance strain-induced precipitation hardenable AA6xxx series aluminium alloys

Applications are invited for one full-time EPSRC Industrial CASE (ICASE) PhD studentship for the project “Understanding the role of alloying additions in the development of high-performance strain-induced precipitation hardenable AA6xxx series aluminium alloys”, at Brunel University London, starting from 1st October 2024. Read more

Ignition and fire spread processes in the Wildland Urban Interface

This PhD project in fire science interlinks prevention and protection from wildfire risk, by focusing on providing a clearer understanding of uncontrolled fires and the conditions that cause them to arise in the wildland urban interface. Read more

Machine Learning Assisted Feedback for Engineering Drawing Assessments

Assessment of engineering drawings can be a complex and lengthy task which causes delay in getting feedback to students. The provision of constructive, relevant and timely feedback is essential to student learning. Read more

Tailoring the Thermomechanical Properties of High Performance Aerospace & Automotive Composite Materials

Interested in high performance, lightweight composite materials? Take advantage of the fact that companies in the aerospace and automotive sectors are currently looking for good materials scientists and engineers with a composites PhD!. Read more

Go On, Disturb the Flow

Supervisory Team. Dr. Swathi Krishna, Prof. Bharath Ganapathisubramani. Project description. If you are a student of aerodynamics, chances are that you have drawn a conventional airfoil with nice, laminar incoming flow at some point. Read more

Biocoal research for use in heritage steam railways

The UK has over 200 heritage railway lines in operation. Traditionally these have run on coal, preferably Welsh steam coal, a form of bituminous coal known for its good calorific values, low sulphur content and semi smokeless properties. Read more

Advanced computational modelling of nanobubble cavitation dynamics

Rapid changes in pressure, such as in high-frequency ultrasound, can stimulate bubbles to nucleate, oscillate, and collapse violently, in a phenomenon known as cavitation. Read more

Mid-infrared hollow-core fibre and laser development for environmental monitoring, non-invasive surgery and advanced manufacturing

In this project we will develop hollow-core optical fibres (HCFs) for mid-infrared laser delivery. HCFs offer a radically new solution for laser delivery as they guide light in a gas-filled core, instead of the glass in conventional optical fibres. Read more

Development of Fibre-Enabled, Distributed Gas Sensing for Environmental and Industrial Monitoring

Supervisory Team: Dr Natalie Wheeler, Prof Radan Slavík, Dr Martynas Beresna. Project Description. We are looking for a new PhD student to join our growing team, working on the design and development of next generation optical fibres to enable novel distributed gas sensing networks. Read more

Optimisation of additive manufacturing process using data-driven machine-learning approach (Fully Funded PhD)

Lead supervisor: Dr Chu Lun Alex Leung. Eligibility: Open to UK students and international students. Fully Funded. 3 years of Home tuition fees (currently £5,860/year) and a tax-free maintenance stipend of £24,000 per year. Read more

PhD (4 years, paid) on on Advanced Material Modelling using Finite Element Analysis for Technical Textiles and Textile Manufacturing

Job description. We are seeking a dedicated PhD candidate and postdoc on advanced material modelling in the textile domain. In this project you will dive deep into a cutting-edge research area, exploring the complexities of advanced textile material modelling. Read more

Large Language models for Maintenance Optimisation

The University of York is embarking on transformative research in data-centric engineering, digital twins, and AI, revolutionizing the way systems are designed and operated. Read more

Intelligent microsystems – Micro-sensors with in-sensor computing capabilities

In the era of Internet-of-Things (IoT), there will be an astronomical amount of data generated from numerous sensors worldwide. It is extremely insecure, power-inefficient, and time-consuming to transfer all the data between sensor nodes and computing units frequently. Read more

Filtering Results