Corrosion Optimization of Additively Manufactured High-manganese (high-Mn) Steels

High-manganese (high-Mn) steels are limited in their application due to their low with moderate corrosion resistance, but their electrochemical properties can further be enhanced especially in harsh environmental conditions. This project aims to develop a unique high-manganese (high-Mn) steels fabricated via additive manufacturing process putting into considerations the necessary printing parameters and investigate their corrosion resistance performance in different environments to ascertain the best environment for industrial applications. The working hardening and strengthening mechanisms will thereafter be investigated.

For informal enquiries about the project, contact Dr Temitope Olugbade, tolugbade001@dundee.ac.uk

For general enquiries about the University of Dundee, contact doctoralacademy@dundee.ac.uk

Our research community thrives on the diversity of students and staff which helps to make the University of Dundee a UK university of choice for postgraduate research. We welcome applications from all talented individuals and are committed to widening access to those who have the ability and potential to benefit from higher education.

QUALIFICATIONS

Applicants must have obtained, or expect to obtain, a UK honours degree at 2.1 or above (or equivalent for non-UK qualifications), and/or a Masters degree in a relevant discipline. For international qualifications, please see equivalent entry requirements here: Study at the University of Dundee, Scotland, UK

English language requirement: IELTS (Academic) overall score must be at least 6.5 (with not less than 5.5 in reading, listening, speaking and 6.0 in writing). The University of Dundee accepts a variety of equivalent qualifications and alternative ways to demonstrate language proficiency; please see full details of the University’s English language requirements here: English language requirements | University of Dundee, UK

APPLICATION PROCESS

Step 1: Email Dr Temitope Olugbade (tolugbade001@dundee.ac.uk) to (1) send a copy of your CV and (2) discuss your potential application and any practicalities (e.g. suitable start date).

Step 2: After discussion with Dr Temitope Olugbade, formal applications can be made via our direct application system. When applying, please follow the instructions below:

Candidates must apply for the Doctor of Philosophy (PhD) degree in Mechanical Engineering (3 year) using our direct application system: Mechanical engineering and mechatronics research degrees | University of Dundee, UK

Please select the study mode (full-time/part-time) and start date agreed with the lead supervisor.

In the Research Proposal section, please:

Enter the lead supervisor’s name in the ‘proposed supervisor’ box

Enter the project title listed at the top of this page in the ‘proposed project title’ box

In the ‘personal statement’ section, please outline your suitability for the project selected.