University College London Featured PhD Programmes
Engineering and Physical Sciences Research Council Featured PhD Programmes
University of Exeter Featured PhD Programmes
University of Sussex Featured PhD Programmes
University College London Featured PhD Programmes
United Kingdom ×
10 miles
Chemical Sciences×

Chemical Engineering PhD Projects, Programs & Scholarships in the UK

We have 371 Chemical Engineering PhD Projects, Programs & Scholarships in the UK

  • Chemical Sciences×
  • Chemical Engineering×
  • United Kingdom×
  • clear all
Order by 
Showing 1 to 30 of 371
  New calcium phosphate bone cements for potential biomaterial applications; bone repair and/or scaffold fabrication
  Prof I Gibson, Prof J M S Skakle
Applications accepted all year round

Funding Type

PhD Type

Calcium phosphates bone cements are widely used for bone-replacement materials due to their chemical similarity to natural bone but also their ability to set and harden in situ and their ability to be injected as a paste.
  Application of Nanotechnology in Drilling Engineering
  Dr R Rafati, Dr A Sharifi
Applications accepted all year round

Funding Type

PhD Type

Production from unconventional hydrocarbon resources, such as shale gas, shale oil, deepwater and arctic reservoirs requires advanced drilling and extraction technologies.
  Application of non-thermal plasma-assisted heterogeneous catalysis for the upgrading of methane
  Dr P Kechagiopoulos, Dr M N Campbell-Bannerman
Applications accepted all year round

Funding Type

PhD Type

In recent years, plasma-catalysis has emerged as a promising technology to improve the performance of existing catalytic processes.
  Biogas upgrading by means of cyclic adsorption processes
  Dr C Fernandez-Martin, Dr D Dionisi
Applications accepted all year round

Funding Type

PhD Type

Global warming is one of the most worldwide current challenges facing humanity, a direct consequence of the increasing CO2 emissions generated from the combustion of fossil fuels.
  Continuous separation of conglomerate forming enantiomers using crystallization process
  Dr A Majumder, Dr D Dionisi
Applications accepted all year round

Funding Type

PhD Type

Enantiomers are the results of chirality or handedness of molecules which are the non-superimposable mirror images of each other.
  Development of cutting-edge microporous adsorbents for gas separation processes
  Dr C Fernandez-Martin, Dr A Majumder
Applications accepted all year round

Funding Type

PhD Type

Developing cost-effective adsorbents aiming at separating impurities from different gas mixtures is a real and necessary challenge for the industry, especially the energy sector.
  Durability analysis in hydrogen fuel cell vehicles
  Dr M Aleyaasin, Dr A ALIAKBAR JAMSHIDI FAR
Applications accepted all year round

Funding Type

PhD Type

In this project , the heavy duty hybrid electric vehicles is considered for the investigation. The propulsion in these trucks is based on parallel operation of a bank of lithium batteries and series of hydrogen fuel cells.
  Efficient simulation of the effect of mixing and flow condition on product crystal qualities in a continuous crystallizer using coupled CFD-PBE approach
  Dr A Majumder, Dr J Derksen
Applications accepted all year round

Funding Type

PhD Type

The majority of the active pharmaceutical ingredients (APIs) used in the pharmaceutical industries are crystals of organic molecules.
  Enhanced Oil Recovery (EOR) from depleted Sandstone and Carbonate/chalk reservoirs
  Dr P Jadhawar, Dr H Hamidi
Applications accepted all year round

Funding Type

PhD Type

Nearly one third of the oil is left behind in the reservoir after the primary and secondary recovery methods of oil recovery.
  Exploitation and production from Methane Hydrate reservoirs (Arctic and Subsea porous media)
  Dr P Jadhawar, Dr J Derksen
Applications accepted all year round

Funding Type

PhD Type

Naturally occurring gas (mostly methane) hydrates along the continental margins (coastal offshore) and permafrost sediments are the clean source of energy outnumbering the rest forms of conventional energy sources.
  Hydrodynamics of Magnetic Responsive Foams
  Dr R Rafati, Dr A Sharifi
Applications accepted all year round

Funding Type

PhD Type

Multiphase flow systems such as foams contribute considerably to the world economy and have a wide range of applications from food, medical and fire-fighting to environmental treatment, mineral processing and oil and gas industries.
  Investigation of enhanced oil recovery processes in complex fractured reservoirs
  Dr A Sharifi, Dr R Rafati
Applications accepted all year round

Funding Type

PhD Type

Oil recovery from fractured reservoirs is a complex process due to the presence of high-permeability fracture networks. Many processes that have been used successfully in sandstone reservoirs may not be economically feasible in fractured reservoirs.
  Laser induced breakdown spectroscopy for subsea applications
  Dr T Thevar, Dr K Nakkeeran
Applications accepted all year round

Funding Type

PhD Type

Laser Induced Breakdown Spectroscopy (LIBS) is a widely used technique to obtain the elemental constituents of a sample. The process uses a short pulse of focused laser light to evaporate a minute volume of a target substance by highly localized heating to temperatures greater than 5000 K.
  LNG sloshing and Leidenfrost droplet dynamics – modelling gas-cushioned liquid-solid impacts with phase change
  Dr P D Hicks, Dr M N Campbell-Bannerman
Applications accepted all year round

Funding Type

PhD Type

The impact of liquefied natural gas (LNG) with the walls of its containing tank and the impact of droplets with very hot surfaces are two examples of liquid-solid impacts in which the liquid may be close to thermodynamic equilibrium with the surrounding gas/vapour.
  Low temperature steam reforming of methane for hydrogen production
  Dr P Kechagiopoulos, Dr X Wang
Applications accepted all year round

Funding Type

PhD Type

Hydrogen, a primary raw material of the chemical industry, presents significant potential as an energy carrier that can drive the implementation of highly efficient energy systems at a reduced environmental impact.
  New responsive electrolytes for energy conversion
  Dr A Martinez-Felipe, Dr M N Campbell-Bannerman
Applications accepted all year round

Funding Type

PhD Type

Fuel cells have high efficiency, generate low levels of emissions, and can consume renewable sources, in combination with energy vectors, making them excellent candidates as for alternative power production technologies.
  Process models for Portland cement manufacturing
  Dr M N Campbell-Bannerman, Dr P Kechagiopoulos
Applications accepted all year round

Funding Type

PhD Type

Cement is the most ubiquitous product after drinking water, with 4.1B tons produced in 2017 alone, enough for half a ton per person per year worldwide.
  Raindrops, pesticides, and oil spills – droplet interactions with porous and textured surfaces
  Dr P D Hicks, Dr Y Tanino
Applications accepted all year round

Funding Type

PhD Type

Droplet interactions with porous and textured surfaces play a crucial role in many important physical processes including the spraying of plant leaves with…
  Stratified shear flows in inclined pipes
  Dr Y Tanino, Dr D Van der A
Applications accepted all year round

Funding Type

PhD Type

Stably stratified shear flows are ubiquitous in the environment and industrial systems. In the atmosphere such flows are associated with clear air turbulence.
  Thermally superconducting and superinsulating nanofluids and their use in nanodevices
  Dr M N Campbell-Bannerman, Dr J Derksen
Applications accepted all year round

Funding Type

PhD Type

Nanotechnology is the forefront of a new industrial revolution. As the scale of new devices shrink, the design bottle-neck becomes getting rid of waste heat.
  EPSRC Centre for Doctoral Training in Engineered Tissues for Discovery, Industry and Medicine (LifETIME)

Funding Type

PhD Type

The CDT will train the next generation of leaders in developing in vitro tissues, sensing and diagnostics to develop humanised in vitro systems to drive better drug screening.
  A linear peristaltic pump for biological media
  Dr A Gatto, Prof T Anson
Applications accepted all year round

Funding Type

PhD Type

Established methods used to transport biological media such as axial, centrifugal and peristaltic pumps can cause damage to micro organisms due to shear stress, crushing and high velocity movement.
  Biomass Combustion Ash in the Removal of Micro-pollutants from Water
  Dr S Soltani
Applications accepted all year round

Funding Type

PhD Type

The UK is committed to reducing greenhouse gas (GHG) emissions by 80% compared to the 1990 emission levels by the year 2050. Negative emission technologies such as biomass combustion with carbon capture is vital to meet the Paris Agreement climate targets.
  Integrated Air Quality Pollution Control Cooling System
  Prof M Kalbassi
Applications accepted all year round

Funding Type

PhD Type

India is amongst array of developing countries with one of the worse air pollutions problems in the world.
  Mitigation against stray current induced corrosion in reinforced concrete
  Dr K Tang
Applications accepted all year round

Funding Type

PhD Type

Railway stray current induced corrosion will become more prominent in the UK alongside the development of high-speed rails. This project will look into the provisions to mitigate railway stray current induced corrosion in reinforced concrete.
  Modelling and mitigation of early-age cracking in reinforced concrete structures
  Dr K Tang
Applications accepted all year round

Funding Type

PhD Type

The project will investigate the potential of modelling the thermal behaviour of concrete structures at early ages due to cement hydration through finite element modelling.
  Synthesis and Modelling of Robust Processes for Desalination of Shale-gas Produced Water
  Dr S Soltani
Applications accepted all year round

Funding Type

PhD Type

Shale gas extraction via hydraulic fracking is a technique in which gas is extracted from the shale layers of rock under the ground.
  Concrete 3D printing
  Dr S Ghaffar
Applications accepted all year round

Funding Type

PhD Type

The four key characteristics of the fresh concrete relevant to 3D printing are. (1) Pumpability. the ease and reliability with which material is moved through the delivery system; (2) Printability.
  High-Performance Compressed Straw Board (HPCSB): A New Generation of Building Materials
  Dr S Ghaffar
Applications accepted all year round

Funding Type

PhD Type

This project aims to introduce a greatly improved, lightweight variant of Compressed Straw Board (CSB) for the construction industry, strong enough to accommodate structural loads both in tension and under compression.
  Control of IC Engine Emissions with Addition of Hydrogen
  Prof T Megaritis, Dr L Ganippa
Applications accepted all year round

Funding Type

PhD Type

Utilisation of hydrogen gas mixtures as means of controlling engine exhaust emissions through combustion improvements or aftertreatment systems enhanced performance.
Show 10 15 30 per page


FindAPhD. Copyright 2005-2019
All rights reserved.